7 Warning Signs To Call A Plumbing Company For A Sump Pump Repair | Kingman, AZ

For most homeowners, a sump pump is essential for keeping their homes dry and protected from water damage. Sump pumps are responsible for collecting and transferring the water away from the home’s foundation. If your sump pump is not functioning properly, it can leave your Kingman, AZ home vulnerable to water damage and costly repairs.

It is important to schedule regular maintenance for your sump pump to keep it functioning well. However, if you need a sump pump repair, it is best to call a professional plumbing company for help. A plumbing company will be ready to assess the damage and repair the sump pump to protect your home from water damage.

When looking for a plumbing company to help with your sump pump repair, it is crucial to look for one that is experienced and has good customer reviews. You can avoid a flooded basement if you keep an eye on the following signs.

It’s Old

When a sump pump reaches 10 years old, it would be a good idea to replace it rather than repair it. This is because many of the components within the sump pump can start to wear out and break down over time. As a result, you may spend more on repairs than on replacing the sump pump with a newer, more efficient model.

Additionally, if you choose to repair the sump pump, you may have to replace it shortly after anyway. Installing a new sump pump can ultimately save you time and money in the long run.

A new, more efficient model can help keep your basement dry and prevent any damage that may result from flooding.

Excessive Noises

When you hear loud or excessive noises from your sump pump, address the problem as soon as possible. These noises could indicate a problem with the pump’s components, such as worn bearings, a faulty impeller, or a clogged discharge line.

If ignored, the pump can become inefficient and eventually fail. It’s best to contact a plumber from a reputable plumbing company to inspect and determine the repairs needed to prevent further damage. In some cases, the pump may need replacement.

It’s also important to regularly check the pump to ensure it’s functioning accurately and there are no blockages. Regular maintenance can help ensure the pump is up to task and prevent costly repairs.

Visible Corrosion and Rust

A rusty sump pump is an indication of a larger problem. Rust can form due to constant exposure to moisture and water, and the rust can lead to bacteria growth. This can interfere with the pump’s ability to transfer water away from your home. As a result, you may have to deal with drainage issues and potential flooding in your Kingman, AZ home.

Therefore, it is crucial to inspect your sump pump regularly and look for signs of rust or bacteria growth. If you notice any rust, it is important to contact a plumbing company to assess the damage and repair or replace your sump pump as soon as possible.

Tripping Circuits

A sump pump relies on electricity to power the motor and pumping mechanism to remove any excess water that accumulates in the sump basin. If the pump trips the circuit constantly upon turning on, it could indicate a problem with the electrical system.

Possible causes may include a stuck impeller, damaged wiring, or a system switch. It’s important to call a plumbing company to determine and fix the issue as soon as possible. The plumber will check for any potential faults and may replace any faulty wiring or components.

In some cases, the switch may need replacement, or the impeller may need unclogging. Regardless of the cause, it is advisable to get the problem resolved as quickly as possible to prevent the potential for flooding.

The Pump Runs Continuously

When a sump pump starts to cycle constantly, it can indicate a problem. Generally, this may be due to a faulty switch or an inadequate pump size. A repair can solve the issue if the switch is not working. But, if the pump is too small, it needs to be replaced with a larger model.

It’s best to request a plumbing company to inspect the sump pump and its components to determine the cause of the problem. Also, check for signs of blockages, as this can cause it to run continuously. Fixing the problem sooner is crucial to ensure that the sump pump is functioning rightly and not causing any damage to your home.

Strange Smell

When a sump pump fails, it can lead to standing water in the basement, creating the perfect environment for mold and mildew growth. This can cause a buildup of musty odors, which can be very unpleasant and potentially harmful to your health.

It is important to inspect your sump pump regularly and ensure it is in good working order. Taking the necessary steps to resolve the issue can help ensure that your family is safe and that your basement is free of unpleasant odors.

Irregular Cycling

When a sump pump turns on and off too often, it is a sign that something is wrong and needs repair. The most likely culprit is the float switch, which tells the pump when to turn on and off. If the float switch is not working correctly, it could cause the pump to turn on and off too often.

It’s also possible that the problem could be due to a worn-out motor or a clogged impeller. No matter the cause, it is important to have a plumbing company inspect and repair the sump pump as soon as possible to prevent any further damage or flooding.

Ring Us Up!

If you’ve noticed any of the above signs of a failing sump pump, it is crucial to take action quickly. Do not wait for a major flood to cause costly damage to your Kingman, AZ home.

Contact Benjamin Franklin Plumbing of Mohave County, a qualified plumbing company, to come and assess your sump pump and repair or replace it if necessary. Our plumbers can help you with your sump pump installation, maintenance, and repair needs.

Photo By Robin Gentry at istock

Leave a Reply